RF Power Amplifiers
PA10W,
PA15W, PA75W and PA100W
 
PA10W
PA15W
Models and Ordering Information
| Model |
Price |
Order |
PA10W
|
$1845
|
|
PA15W
|
$2085
|
|
PA75W
|
$2985
|
|
RF Power
Amplifiers
The PA10W, PA15W, PA75W and
PA100W RF power amplifier modules are capable of
providing 10 W, 15 W, 75 W and 100 W RMS power
respectively. They are equipped with
blanking/enabling circuitry which keeps the
modules blanked (turned off) until a TTL signal
(logical high) is applied. The blanking/enabling
circuitry helps to conserve power, keeps the
amplifiers cool under typical operating
conditions, and provides noise reduction during
the reception of NMR signals. The TTL signal is
asserted on a 10-pin male IDC header which can
be easily connected to the TTL output from the
RadioProcessor™ USB boards.
PA10W Module
The PA10W RF power amplifier is a
very compact broadband module delivering 10
watts into a 50-ohm load. It has a 3 dB range of
10 MHz to 75 MHz and the control board is
powered by a DC +12 V power supply. The power
amplifier has standard female SMA jacks for RF
input and output, and a standard 4-pin ATX
connector for the input DC power. It typically
operates in Class AB. The entire product comes
in a very small form factor measuring 2.25" x
1.4" x 1.4" (57 mm x 36 mm x 36 mm).
PA10W Packaging Options
- PA10W module with deblanking circuitry, no
enclosure.
- PA10W Enclosed with iSpin-NMR system
PA15W Module
The PA15W RF power amplifier is a
very compact broadband module capable of
delivering more than 15 watts into a 50-ohm
load. It has a 3 dB range of 4 MHz to 100 MHz
and the control board is powered by a DC +12 V
power supply. The power amplifier has standard
female SMA jacks for RF input and output, and a
row of screw terminal connectors for the input
DC power. It typically operates in Class AB. The
entire product comes in a very small form factor
measuring 2.5" x 2.75" x 3.0" (63 mm x 70 mm x
76 mm).
PA15W Packaging Options
- PA15W module with deblanking circuitry, no
enclosure.
- PA15W Enclosed with iSpin-NMR system
PA75W Module
The PA75W RF Power Amplifier has maximum
continuous power, in excess of 200 Watts Peak
Envelope Power (PEP) in pulsed mode. It has a
frequency range of 1 MHz to 30 MHz 3 dB
bandwidth.
PA100W Module *No
Longer Available*
The
PA100W RF Power amplifier comes in a very
compact broadband module delivering 100 watts
into a 50-ohm load. It has a frequency range of
10 MHz to 100 MHz and is powered by a DC 24-28
volt power supply. The PA100W module has
standard female SMA jacks for RF input and
output, and a screw terminal block for the DC
power input. It typically operates in Class AB.
The product comes in a small form factor
measuring 3.15" x 2.54" x 2.33" (80 mm x 65 mm x
59 mm).
Manuals
Purchase Includes:
- Standard Warranty- 1 year from Invoice
date.
- 30-day Money-Back Guarantee
|
