SpinCore Logo Home
Applications
Contact Us
Purchasing Info
About Us
Software Downloads

banner_left.jpg banner_right.jpg




PBLV-DDS - PulseBlaster LabVIEW Extensions with RF Signal Generation


PBLV-DDS Interface
Figure 1 - PBLV-DDS Frequency Test


The PBLV-DDS package utilizes LabVIEW's intuitive graphical user interface to control the DDS functionality of any PulseBlasterDDS or RadioProcessor board.  It can be used in 2 ways as described below:

Method 1: User Interfaces with LabVIEW Runtime Engine

  • National Instruments LabVIEW Runtime Engine can be downloaded from NI's website.
    • LabVIEW 2012 Runtime Engine is required to use the executable user interfaces for programming boards.

Method 2: Customizable VIs

Documentation


PBLV-DDS-II - PulseBlaster LabVIEW Extensions with Dual RF Signal Generation


PBLV-DDS-II
                  Interface
Figure 2 - PBLV-DDS-II Frequency Example


The PBLV-DDS-II package utilizes LabVIEW's intuitive graphical user interface to control the dual RF functionality of the PulseBlaster-DDS-II board.  It can be used in 2 ways as described below:

Method 1: User Interfaces with LabVIEW Runtime Engine

  • National Instruments LabVIEW Runtime Engine can be downloaded from NI's website.
    • LabVIEW 2012 Runtime Engine is required to use the executable user interfaces for programming boards.

Method 2: Customizable VIs

Documentation



Home | Products | Applications | Contact Us | Purchasing Info | About Us | Software Downloads

© 2021 SpinCore Technologies, Inc.